Unzip all files in same directory.

VB141_NT.DLL must be placed in application directory

The file "PORT_IO.SYS "  must  be located in 32-bit driver directory,  
  for example c:\windows\System32\Drivers.
The file "PORT_IO.REG" must be run once to make required entries in 
  Registry for loading of PORT_IO.SYS. That  can be done by simply 
  double-clicking on the file, or RUN from the program manager. Required 
  entries can also be done manually using utility such as Regedit.exe. 
  After registry entries are made you  must reboot machine before attempting 
  to run the application.

Run VB141_NT.EXE, or open VB6_M14.VBW and run from  within project workspace.

Default configuration for single channel scan at rate approaching 1000 hertz.

Digital input is available anytime, and is also autmatically updated whenever
the "Get one Conversion" button is pressed or with each scan in scanning mode.

Optically isolated outputs are controlled using the "ext-chan" combo box.

See end of  VB141.CFG configuration file for explanation of the lines in that file.
If you must edit that file, do so with care and be sure to keep a backup of the original.

Debugging is set to 0 by default. Valid debug levels are 0-4. The higher value writes
more information to  "141debug.txt"  from DLL.


Last Updated 6-6-2000