Quick-Links to web folders
each application example contains a copy of the DLL that was used at the time it was created
you can either use it or copy the most recent DLL for  Win2k/XP/NT  or   Win98/ME


 
  VisualBasic style applications
  LINK   Functions demonstrated
GetOneVoltage connect to device,  read a voltage from default channel zero, uses the functions shown below
EX_Connect,   EX_GetOneConversion
.INI example load configuration from M30x_SP.ini,  start and end a single-channel scan, uses the functions shown below
EX_Connect,   EX_SetDevToIniSetup,   EX_SetDevToDefaultSetup,   EX_GetPolledModeChan,   EX_GetRoundedRate,   EX_GetCalculatedRate,   EX_SetDataLogOptions,   EX_Run,   EX_CheckScanStatus,   EX_Stop,   EX_StopComplete
Scan Example connect to device,  start and end a single-channel scan,  perform channel change during scan, uses the functions shown below
EX_Connect,   EX_SetDataLogOptions,   EX_SetScanType,   EX_SetPolledModeChan,   EX_Run,   EX_CheckScanStatus,   EX_GetScanDataInt,   EX_Stop,   EX_StopComplete
Scan Example2 connect to device,  start and end a multi-channel scan, uses the functions shown below
EX_Connect,   EX_SetDataLogOptions,   EX_SetScanType,   EX_SetMultiChanScanChans,   EX_Run,   EX_CheckScanStatus,   EX_GetScanDataInt,   EX_Stop,   EX_StopComplete
MultiFunction connect to device,  set a channel,  read a voltage,  send analog output,  send and read digital I/O, uses the functions shown below
EX_Connect,   EX_GetDigin,   EX_SendDigout,   EX_SetPolledModeChan,   EX_GetOneConversion,   EX_SendDAC
AutoScanEnd connect to device,  setup for a scan that ends after the data log file reaches a size that you set,  shows how to check status of the scan that is running  run and stop a scan - this sample application logs the scan data to a disk file. See documentation for logging to memory to be read by application or log to both disk and memory.  -  Uses the functions shown below
EX_Connect,   EX_SetDataLogOptions,   EX_Run,   EX_CheckScanStatus,   EX_Stop,   EX_StopComplete