If you have never installed one of our 301/302 devices on your
PC, you must first do so using the following procedure:
1.) BEFORE CONNECTING THE USB CABLE to your new 30x device-
    Extract the contents of "InstallDriver.zip" from the "UserApp.zip" 
    onto a floppy diskette. If you do not have a floppy diskette 
    drive, you can extract them into a folder on your hard-disk.
2.) Follow the installation procedure outlined in "Install.htm"


Application installation:
1.) Create a new folder and extract "UserApp.zip" into it.
2.) Run setup.exe
3.) Go to folder that application was installed into,
    right-click mouse on "LL_usb.cfg" and choose "notepad"
    from option of programs to "open with". Replace the
    "ID=3201" with your device ID number and then save.
4.) Run LL_USB.exe 



updated 6-6-07