This information last updated:12-15-04 Device Driver last updated 7-6-04 DLL last updated 12-2-04 Application last updated 7-9-03 ################################### Following for use in Win2k\XP ################################### LL_USB2k.ZIP archive contains: INSTALL.ZIP (open first): Everything required for installation. Open this archive onto a floppy diskette to use for driver installation. Use windows device manager to install or update driver using the floppy disk you've just created. Read "INSTALL.DOC" within the "INSTALL.ZIP" archive for complete installation instructions. GUI_ws.ZIP: All source code, documentation, ready-to-run demo app, and DLL. Open this archive into a directory where you can build the source and/or run the application ====================================== ====================================== Read the following only after hardware installation described above. ====================================== ====================================== ====================================== To run the application right away, note that there are three files of interest to you within the GUI_ws.ZIP archive: M30xDemo.EXE LL_USB.CFG LL_USB2k.DLL Place those files within their own directory. Open "LL_USB.CFG" within any text editor. Note the many entries of Device IDs. Replace any one of those with the Device ID of your hardware. Note that the format of that file is critical, so don't add any extra empty lines or remove any that are already there. There is an explanation of it's format at the end of the file. After installing the driver as per the instructions in the INSTALL.DOC file and the changes to the configuration file you are ready to run the application.