GENERAL

Configurations from 1 to 64 channels.

Supports Model 134, 140 and 141 A/D cards.

Sampling rates from 1/day to 1/second.

Burst mode available with Model 134 up to 13KHz.

Up to 64 voltage or current inputs using Model 17B Multiplexers.

THERMOCOUPLE INPUTS

Up to 56 Thermocouple inputs using Model 20B, or 35B Amplifiers.

Linearizations for types E, J, K, S, & T.

Direct reading of temperature in degrees C, F, or K.

Thermocouple types can be mixed.

Individual thermocouple calibration allowed.

One degree C accuracy, 0.05 degree C resolution.

DISPLAYED OUTPUT

Each channel has a label and a units label.

Individual offset and scaling factors for each channel.

Each channel is rounded to the desired precision.

High and low alarm limits for each channel.

Audible or silent alarms.

Any channel can be removed from the displayed output.

PRINTER OUTPUT

Log format includes time stamp and all data points with labels.

Strip chart allows up to 16 channels to be plotted.

Strip chart resolution is 1 part in 850.

Selectable scaling and indexing for strip chart.

The entire configuration can be printed.

DISK OUTPUT

Automatic data storage, if desired.

Data files are Lotus 123 (reg. trademark) compatible.

Burst files can be Lotus or DADiSP compatible.

SYSTEM REQUIREMENTS

256K IBM PC, XT, AT, or compatible with one disk drive and one Lawson Labs A/D card minimum.

A second disk drive is recommended.

IBM/Epson-compatible graphics printer is needed for strip chart.

PRICE

$70.00 for executable code package.

Add $80.00 for source code.

Source code requires QuickBASIC 3.0 or 4.5

PC64GRF is essentially identical to PC64 except that a Model 135 A/D card is required. If an EGA or VGA monitor is available, data can be displayed graphically during high-speed sampling bursts. Plotting rates in excess of 5KHz are attainable on a fast machine. Up to 15 of the 64 available burst points can be graphed during acquisition. No data is skipped and all consecutive points are joined by lines. Each channel plots in a different color. One, two, three or four sets of axises can be displayed with one or more data points on each axis.

PRICE

$150.00

LOG512 is an expanded version of Lawson Labs PC64 Data Logging Software. Up to 512 channels can be logged using Model 66 Expansion Modules and Multiplexers. Each Expansion Module allows one of the four input channels on a Lawson Labs A/D card to be expanded to 128 voltage channels or 112 thermocouple channels. With four Model 66s, 512-channel differential voltages or 448 thermocouples can be accommodated. A 512-channel single-ended system costs under $8 per channel. Thermocouples and voltages can be mixed in any combination. Voltage channels are easily modified to read current.

LOG512 is parallel in function to PC64 Data Logging Software with enhancements to speed the configuration of large systems. The burst mode is not available in LOG512. See the PC64 description for system requirements and software pricing.

PRICE (Model 66)

$195.00

	This site still under construction.

	The requested document should arrive soon.



      

GENERAL

Supports Lawson Labs Model 201 24-bit Serial Data Acquisition System and Model 17B, 20B, and 35B Multiplexers and Multiplexed Amplifiers.

Configurations from 1 to 96 channels.

Resolution of 24 bits Voltage, current or thermocouple inputs.

Storage rates from 1/day to 1/second.

Not copy-protected.

Compiled version of BASIC code provided.

Source code is available.

THERMOCOUPLE INPUTS

Up to 84 Thermocouple inputs.

Linearizations for types J, K, T, S, & E.

Thermoucouple types can be mixed.

Individual thermocouple calibration allowed.

One degree C accuracy, 0.01 degree C resolution.

All inputs are protected against overvoltage.

DISPLAYED OUTPUT

Each channel is labeled; i.e. "TEMP#1 319 deg.C".

Individual offset and scaling factors for each channel.

Each channel is rounded to the desired precision.

High and low alarm limits for each channel.

Audible or silent alarms.

Any channel can be removed from the display output.

PRINTER OUTPUT

Log format includes time and all data points with labels.

Strip chart allows up to 16 channels to be plotted.

Strip chart resolution is 1 part in 850.

Selectable scaling and indexing for strip chart.

The entire configuration can be printed.

DISK OUTPUT

Automatic data storage available at preset interval.

The scan #, time and scaled data are stored.

Files are Lotus 123 compatible.

SYSTEM REQUIREMENTS

An IBM PC/XT/AT/386/486® or compatible computer with 256K of memory and a serial port is required. You will also need a Model 201 24-Bit Serial Data Acquisition System. Two disk drives are recommended. An IBM or Epson-compatible® graphics printer is required for the strip chart.

PRICE

$150

PC250 is a DOS Data Logging Software Package for the Model 250 Data Acquisition System. It is equivalent to PC96 for the Model 201 with enhanced data rates made possible by the speed of the Model 250. See the PC96 information for details.

AnaLog is a Windows® based software platform for acquiring high resolution signal data using the Lawson Labs Model 201 24-bit data acquisition hardware. This inexpensive system provides a high quality, turn-key solution for collecting data on up to 96 independent channels with 22 bits of effective resolution. Each channel can be individually configured for start/stop logging criteria, logging rate(interval), etc.. Data is logged to the PC's hard-disk in standard ASCII "flat-file" format for portability to spreadsheets and data analysis packages.

AnaLog is ideal for applications where temperatures, pressures, flows, voltages, and a wide variety of other signals need to be recorded as a function of time.

SYSTEM REQUIREMENTS

An IBM PC/XT/AT/386/486® or compatible computer with 256K of memory and a serial port is required.

A 3-1/2" floppy drive (for AnaLog installation).

Four megabytes of memory or greater.

A serial port for the Model 201 connection.

A high speed serial port with a 16550 UART is required for Turbo Mode(single channel high speed) operation and is strongly recommended for standard operation.

A mouse.

Microsoft® DOS® version 5.0 or later.

Microsoft® Windows version 3.1 in enhanced mode.

A hard disk drive with at least four megabytes of free space for AnaLog software installation, and additional free disk space after AnaLog installation for collected data storage.

PRICE

$395

	Please contact factory



      

	Please contact factory